Mark Broumand
|
Posted on November 19 2025
How Should You Clean Your Diamond Ring?
To keep your Diamond Engagement Ring sparkling, clean it regularly and handle it with care. The safest and most effective way to clean your ring at home is to soak it in a solution of warm water and mild dish soap for 20 to 30 minutes.
After soaking, gently scrub the ring with a soft toothbrush, paying close attention to the underside of the diamond where dirt and oil often collect. Rinse it thoroughly with clean water and dry it with a soft, lint-free cloth.
Avoid harsh chemicals, bleach, or abrasive materials, as these can damage the metal or loosen the setting. For a deeper clean and professional inspection, take your Diamond Engagement Ring to a jeweler every six months to ensure the diamond remains secure and maintains its brilliance.
Why May Diamond Rings Lose Their Sparkle Over Time?
Diamond Rings can lose their sparkle over time due to everyday exposure to oils, lotions, soaps, and dirt. These substances create a thin film that dulls the diamond’s surface and blocks light from passing through it.
Even small amounts of residue can reduce a diamond’s brilliance and make it appear cloudy or less reflective. Dust and debris can also collect in the setting, especially underneath the diamond, further diminishing its shine.
Regular cleaning will keep your Diamond Ring looking its best. By cleaning your ring regularly, you help preserve both its appearance and structural integrity. A clean diamond reflects light more effectively, enhancing its natural brilliance.
The Best Way to Clean Your Diamond Ring at Home
Keeping your Diamond Ring clean at home is easy, but pay attention to protect both the gem and the setting. Follow these detailed steps to restore your ring’s sparkle safely:
-
Prepare a gentle cleaning solution: Fill a small bowl with warm water and add a few drops of mild dish soap. Avoid harsh chemicals, as they can damage the metal or loosen the setting.
-
Soak the ring: Place your Diamond Ring in the solution and let it soak for 20–30 minutes. This helps loosen dirt, oils, and debris, especially in hard-to-reach areas.
-
Gently scrub the ring: Using a soft-bristled toothbrush, carefully clean all surfaces of the ring. Focus on the underside of the diamond and around the prongs, where buildup tends to collect. Avoid scrubbing too hard to prevent scratching the metal.
-
Rinse thoroughly: Rinse the ring under clean, lukewarm water to remove all soap residue. Make sure the drain is closed or use a strainer to avoid accidental loss.
-
Dry with care: Pat the ring dry with a soft, lint-free cloth. Avoid paper towels or rough fabrics that could scratch the metal.
For most rings, cleaning every two weeks is sufficient to maintain brilliance and ensure the diamond continues to shine. More frequent cleaning may be necessary if the ring is worn daily or exposed to lotions, cosmetics, or household chemicals.
Special Considerations by Setting Type
Different ring settings and metals require specific care to maintain their beauty and durability. Elaborate Diamond Rings and Pavé Set Diamond Bands are often more delicate and may need gentler cleaning to avoid loosening gems or damaging intricate details.
Because each ring is unique, consult your jeweler for personalized care instructions. They can recommend the safest cleaning methods and products for your specific setting and metal.
Common Mistakes to Avoid
Cleaning your Diamond Engagement Ring at home can be simple and safe, but certain mistakes can cause permanent damage to the diamond, the setting, or the metal band.
The most common mistakes to avoid while cleaning your Diamond Ring at home include:
-
Using harsh chemicals: Avoid bleach, chlorine, acetone, or other strong cleaning agents. These chemicals can corrode metals like gold and platinum, weaken prongs, and even loosen the diamond from its setting.
-
Using abrasive materials: Never clean your ring with rough cloths, scouring pads, or toothpaste. These abrasive substances can scratch both the diamond and the metal, dulling the sparkle and causing visible wear over time.
-
Cleaning near open drains: Always take precautions when rinsing your ring over a sink. Even a small slip can send your diamond or ring down the drain. Use a strainer or rinse over a bowl of water to prevent accidents.
-
Improper use of ultrasonic or steam cleaners: While professional ultrasonic and steam cleaning can restore brilliance, do not use these tools at home; leave it up to the professionals.
-
Neglecting regular inspections: Skipping regular professional inspections may allow minor issues, such as loose prongs or small scratches, to worsen over time. Even the cleanest at-home care cannot detect these hidden problems.
When to Have Your Ring Professionally Cleaned
Even with regular at-home care, have your Diamond Ring professionally cleaned and inspected every six months. Jewelers examine the setting for loose prongs, worn metal, or other issues that could put the diamond at risk of falling out.
Professional cleaning also restores the ring’s brilliance more thoroughly than home methods. Techniques such as ultrasonic or steam cleaning safely remove deep-set dirt and grime, reaching areas that are difficult to clean at home.
Mark Broumand’s Commitment to Excellence
When we say our Diamond Engagement Rings are handcrafted in Los Angeles, the statement embodies our dedication to quality, artistry, and precision. Each ring is carefully designed and meticulously made, with an unwavering focus on balance, detail, and lasting beauty. From the initial concept to the finished piece, we handle every step with care to achieve perfection.
We choose our diamonds for their brilliance, cut, and integrity, and take no shortcuts in the crafting process. By producing our rings locally in Los Angeles, we maintain complete oversight at every stage, ensuring that each piece meets the highest standards.
